FLOOR CARE MACHINES, FLOOR BUFFER & SUPPLY

Battery Automatic Scrubbers

Electric Automatic Scrubbers

Floor Sweepers

Wet Dry Vacuums

Floor Maintenance Accessories

Tile and Grout Cleaning Hard Surface Machines

Grout Cleaning Accessories

Floor Care Chemicals

Floor Pads

Pad Holders and Brushes

Explosion Proof Floor Machines

CARPET CLEANING EQUIPMENT, ACCESSORIES & CLEANERS

About Carpet Cleaning

Carpet Cleaning Machines- 2 - 4 gal

Carpet Cleaning Machines- 5 - 6 gal

Carpet Cleaners Extractors-11 -12 gal

Carpet Cleaning Equipment- 17 gal

Ninja Carpet Extractors

Carpet Cleaning Machines- Truck Mounts

Carpet Cleaning Extractors- Self Contained

Carpet Cleaning Machines- Spotters

Scrubbing Bonnet Machines - Heavy Duty

Carpet Cleaning Equipment

Carpet Cleaning Machines- Pumps and Vacuums

Carpet Cleaning Power Wands

Carpet Cleaning Wands

Accessories

Carpet Cleaning Encapsulation

Carpet Cleaning Chemicals

Portable Start Up Packages

Truck Mount Start Up Packages

Truck Mount Accessories

Commercial Vacuums

Pile Lifters

Commercial Pressure Washers

Pressure Washers and accessories

Leasing Options

Order or Question Form

E-mail Us

Contact Information

Terms and Legal

800-784-8870

info@cleaning-equipment.net

 

 

   FLOOR BUFFERS - FLOOR MACHINES - FLOOR SCRUBBERS

FLOOR CLEANING MACHINES

175 rpm Floor Buffers - Standard Buffing and Stripping   300 rpm Floor buffers    About Floor care

Multi tasking floor buffer, 1 machine - 13",17",21"   Electric Floor Burnishers- 1500 rpm and 2000 rpm

Propane Floor Burnishers   Propane Floor Strippers

Standard Speed Floor Buffers / Scrubbers - 175 rpm

Floor buffers - Floor machines and supplies

MERCURY FLOOR BUFFERS

*1.5 HORSE POWER

INCLUDES PAD HOLDER*

MADE IN USA UNLIKE OTHER CHEAPER BUFFERS THAT ARE MADE IN MEXICO OR CHINA.

 

Mercury floor buffer, scrubber machine, BUFFERS

 

bullet Safety enhanced interlock switch / both hands in control
bullet Safety enhanced, non-conductive dual triggers / eliminates shock potential
bullet Fully adjustable handle position / comfortable for all operators
bullet Motor plugs in at handle base / for easy maintenance
bullet Non-marking retractable 6" wheels / for easy transport
bullet Traditional all-metal, reinforced bell housing apron
bullet Non-marking super thick bumpers / protects baseboards
bullet Triple-planetary high torque transmission / for the toughest jobs
bullet Precision balanced heavy-duty 66-frame motor
bullet All metal chassis / added weight for fastest results

 

SPECIFICATIONS

Machine Size
15" 17" 19" 21"
1.5 HP Model
L-15E L-17E L-19E L-21E
Weight
96 lbs. 99 lbs. 102 lbs. 105 lbs.
Motor Type
1.5 HP A/C 2 capacitors, 13-15 amp draw
Brush Speed
175RPM
175RPM
175RPM
175RPM
Chassis
Polished Aluminum
Power Cord
50 foot (15 M) Safety Yellow 14/3 Ga
Brush Drive
“B” style clutch
Wheels
6” non-marking
Warranty
5 years motor and gearbox
15"...$685.00    Call in special $675.00

17"...$690.00    call in special $680.00

19"...$695.00     call in special $685.00

21"...$695.00     call in special $685.00

ALL INCLUDE PAD HOLDER AT NO EXTRA CHARGE

Mention specials when calling in.

 

800-784-8870 or 215-533-5508

800-784-8870 or 215-533-5508 M-F 8:00 am - 4:00 pm Eastern Time

 

New * EDIC FLOOR BUFFERS * NEW

  (175 rpm)

No job is too tough for this rugged series of floor machines from EDIC. With its all-metal construction and steel planetary gear boxes, the Saturn can stand up to the heaviest workloads, yet the ride is surprisingly smooth and quiet. The low speed models are built specifically to handle the stress associated with stripping and scrubbing hard floor surfaces as well as bonnet cleaning and shampooing carpets. Features like the quick and easy handle adjustment, anti-fatigue design, and the exclusive “lockout lever” for safe two-handed start up make this machine operator friendly and a winner in every commercial setting. Available in six different models, there is a perfect low speed Saturn for any size job.

edic floor machine, floor buffer,

EDIC SATURN floor buffers, floor mahcines, machine

Black Powder Coated

Stainless Steel

 

 

MODEL

SIZE

APRON

MOTOR

WEIGHT

*SALE*

13LS2-SS 13" STAINLESS 1 H.P. 91 lbs  
17LS3-BK 17" BLACK

1.5 H.P.

95 lbs  
17LS3-SS 17" STAINLESS 1.5 H.P. 95 lbs  
20LS3-BK 20" BLACK

1.5 H.P.

98 lbs  
20LS3-SS 20" STAINLESS 1.5 H.P. 98 lbs  

SOLUTION TANK $75.00

SUBSTITUTE A CARPET BRUSH INSTEAD OF PAD HOLDER $40.00*

 

Please call 800-784-8870 or 215-533-5508..

 

 

MERCURY 20" 1500 RPM BURNISHER
MADE IN THE USA !  THEIR IS A DIFFERENCE !

Mercury high speed floor buffer machine
 

Safety enhanced, non-conductive dual triggers / eliminates shock potential
1.5 HP, D/C rectified motor / eliminates brown-outs, low voltage and startup torque problems
Fully adjustable handle position / comfortable for all operators
Non-marking, retractable 6” wheels / for easy transport
Motor plugs in at handle base / for easy maintenance
Non-marking super-thick bumpers / protects walls and baseboards
UL 7C29 listed for reliable quality
2000 RPM model has adjustable front wheel assembly for consistent results even with novice operators
Low profile drive apron / easily reaches under counter coves
Balanced chassis design / provides more precise pad pressure
Flexible pad holder with threaded pad-centering device / conforms to floor irregularities
All metal chassis
Machine Speed 1500 RPM 2000 RPM
20" Model No. DC-21-1500 DC-21-2000
Weight 84 lbs. 86 lbs.
Motor Type 1.5 HP D/C rectified
Amp Draw 13-15 amps
Chassis Polished Aluminum
Power Cord 50 foot (15 M) Safety Yellow 14/3 Ga
Wheels 6” non-marking
Warranty 5 years motor

1500 rpm ...$829.00

 

NEED AN EXPLOSION PROOF BUFFER - GIVE US A CALL

 
Specifications may change with out notice from the manufacturer.

800-784-8870   215-533-5508

About Floor Care

ABOUT COMMERCIAL FLOOR CARE

YOU SPENT A LOT OF MONEY GETTING YOUR FLOOR "WAXED" AND KNOW YOU NEED TO MAINTAIN IT OR IT WILL START LOOKING LIKE YOU NEVER DID ANYTHING TO IT. "WAXED" IS THE WRONG WORD SINCE VERY SELDOM DO WE USE WAX ON COMMERCIAL TILE FLOORS ANYMORE. WE USE A POLYMER COATING THAT WE CALL "FLOOR FINISH".


FLOOR FINISH CLEANING: ALWAYS SWEEP OR DUST MOP THE FLOOR BEFORE CLEANING. ALWAYS USE A NEUTRAL CLEANER TO CLEAN FLOOR FINISH. IF IT DOESN'T SAY NEUTRAL THAN IT ISN'T. DON'T USE MR CLEAN, SIMPLE GREEN, TOP JOB, SPIC AND SPAN AND OTHERS UNLESS THEY SAY NEUTRAL ON THE BOX. A NON-NEUTRAL CLEANER MAY DULL AND EVEN STRIP THE FLOOR FINISH FROM THE FLOOR. YOU NEED A MOP BUCKET WITH RINGER, A MOP HANDLE AND MOP HEAD. IF YOU HAPPEN TO USE THE MOP BUCKET FOR STRIPPING YOU MUST THOROUGHLY CLEAN THE BUCKET OF ALL STRIPPER RESIDUE. DO NOT USE A MOP THAT WAS USED FOR STRIPPING TO CLEAN A FLOOR. IF YOU HAVE A LARGE AREA SUCH AS A SUPERMARKET TO CLEAN YOU SHOULD USE A AUTO SCRUBBER WHICH WILL MAKE YOUR CLEANING A LOT EASIER.

BUFFING & RESTORING: ALWAYS CLEAN THE FLOOR BEFORE BUFFING OR BURNISHING THE FLOOR. SPRAY BUFFING CONSISTS OF A SPRAY BUFF CHEMICAL, A FLOOR BUFFER OF 175 RPM OR 300 RPM AND A FLOOR PAD MADE FOR BUFFING. TO SPRAY BUFF YOUR LIGHTLY MIST THE SPRAY BUFF IN FRONT OF THE BUFFER AND YOU BUFF THAT AREA UNTIL THE SPRAY BUFF IS WORKED INTO THE FLOOR AND A SHINE APPEARS. MOP ON RESTORING USES A SIMILAR CHEMICAL TO THE BUFFING CHEMICAL BUT IT IS APPLIED BY MIXING THE SOLUTION IN A BUCKET WITH WATER AND MOPPING THE SOLUTION ONTO THE FLOOR. YOU LET THE FLOOR DRY AND USE A HIGH SPEED BURNISHER OF 1500 RPM OR MORE WITH A BURNISHING PAD TO SHINE THE FLOOR. THEIR ARE ALSO PASTES THAT CAN BE USED WITH BURNISHERS THAT YOU PLACE A RIBBON OF THE CHEMICALS IN FRONT OF A BURNISHER AND WALK THE BURNISHER UP AND DOWN THE AREA THAT NEEDS TO BE SHINED.


STRIPPING:  IT IS VERY IMPORTANT THAT AFTER YOU STRIP THE FLOOR YOU MUST RINSE THE FLOOR NUMEROUS TIMES WITH A FLOOR NEUTRALIZER TO ASSURE THAT RESIDUE FROM THE STRIPPER IS GONE.  TO STRIP IT IS BEST TO PURCHASE A GOOD QUALITY STRIPPER.  A GOOD QUALITY STRIPPER OR RELIQUIFIER WILL  SAVE YOU TIME AND BACK ACHES.  STRIPPERS, EVEN THE BEST TEND ONLY STRIP ABOUT 4 COATS OF FINISH PER STRIPPING.  IF YOU HAVE MORE THAN 4 COATS OF FINISH ON A FLOOR OR VERY THICK COATS THAT YOU NEED TO STRIP YOU WILL HAVE TO STRIP MULTIPLE TIMES.   IF YOU USE A BUCKET THAT YOU NORMALLY USE TO CLEAN WITH YOU WILL NEED TO RINSE THAT BUCKET OUT VERY VERY GOOD BEFORE YOU USE THAT BUCKET AGAIN.   PREPARE THE FLOOR BY SWEEPING IT.  MOVE ALL FURNITURE OFF THE FLOOR.  MIX YOUR STRIPPER PER DIRECTIONS ON THE CHEMICAL AND ALSO READ THE DIRECTIONS ON THE CHEMICAL.  MOP ON THE STRIPPER AND ALLOW TO SIT FOR AT LEAST FIVE MINUTES.  USE A FLOOR BUFFER WITH A STRIPPING PAD AND SCRUB THE FLOOR.  DO NOT ALLOW THE STRIPPER TO DRY.  DO PORTIONS OF THE FLOOR AT A TIME.  THE EASIEST WAY TO PICK UP THE STRIPPER IS WITH A WET DRY VACUUM.  YOU COULD MOP UP THE STRIPPER BUT IT WILL TAKE LONGER.  FOR CORNERS AND BASEBOARDS USE A AEROSOL FLOOR STRIPPER AND DOODLE STRIPPING PADS.  AFTER YOU HAVE STRIPPED THE FLOOR DO NOT USE THAT MOP FOR ANYTHING ELSE OTHER THAN STRIPPING FLOORS.  NEUTRALIZE THE FLOOR BY RINSING THE FLOOR A FEW TIMES WITH CLEAN WATER IN A CLEAN BUCKET WITH CLEAN MOPS. 

APPLYING FLOOR FINISH:  THEIR ARE MANY DIFFERENT WAYS TO APPLY FINISH.  MOPS, LAMBS WOOL APPLICATORS AND SPONGE MOPS ARE THE MOST COMMONLY USED APPLICATIONS MOPS BEING THE PREFERRED METHOD.  WHEN USING A MOP YOU WANT TO USE A FINISH MOP OR RAYON MOP BECAUSE THESE MOPS TEND NOT TO LINT.  THEIR IS NOTHING WORSE THAN GETTING THROUGH A JOB AND SEEING LINT RUNNING THROUGH THE FINISH.  YOU WANT TO PUT THE FINISH IN A MOP BUCKET.  LINE THE BUCKET WITH A TRASH LINER AS NOT TO CONTAMINATE THE FINISH AND MAKE CLEAN UP EASIER.  DO NOT USE A USED MOP TO APPLY FINISH.  MOP ON FLOOR FINISH IN THIN COATS STARTING FROM THE FARTHEST AREA.  SEALER GENERALLY ISN'T NEEDED WITH NEWER FORMULATED FINISHES.  APPLY 4 TO 5 THIN COATS ALLOWING 20 TO 30 MINUTES BETWEEN COATS.  AFTER THE FIRST COAT YOU CAN BURNISH THE FLOOR FINISH WHICH WILL CUT OFF MICROSCOPIC PEAKS IN THE FIRST COAT OF FINISH BUT THIS IS NOT NECESSARY.  IF YOU APPLIED THE STRIPPED THE FLOOR AND APPLIED THE FINISH CORRECTLY THE FLOOR SHOULD DRY TO A DEEP GLOSS UNLESS THE FINISH YOU USED HAS A SATIN FINISH.

Home

About us: Basic Maintenance Supply Inc is a full line distributor of carpet cleaning equipment, carpet cleaning machines, floor buffer equipment and supplies for the professional carpet cleaner, janitorial service, auto detailer, home cleaning professional, business owner, food service operator, hospitality manager and home owner. We pride ourselves on asking the right questions to assure you receive the proper unit to fill your needs. We have sold carpet cleaning equipment and floor care equipment and supplies throughout the world. We carry a full line of carpet cleaning machines, carpet cleaning equipment and floor buffing and care equipment. We are physically located in Philadelphia Pennsylvania and have been business since 1987. We are proud members of the Eastern Pennsylvania Better Business Bureau.

Our 50,000 square foot facility with our fully stocked 8,000 square foot showroom is physically located in Philadelphia Pennsylvania just off of Interstate 95 and is easily accessible from all major sections of the City, Delaware and Southern New Jersey  .  We stock most chemicals, equipment and supplies for the cleaning industry.  We have a repair center on premises and repair Vacuums, Truck Mounts, Portables, Floor Buffers, Propane Buffers and other electrical and small engine equipment .  We carry a full line of common repair parts and have access to most parts for most equipment.  We ship through out the world. 

Equipment and Parts Manufacturers: Century 400- Ninja, Diamondback and Sensei, Prochem, Avenger 500 Truckmount (Prochem Blazer) , Hydro-force, EDIC, Malish, Mercury, Pumptec, Shurflo, General Floorcraft, Mytee, Sandia Plastics, Koblenz, Powerflite, BE Pressure Washers, Aztec, PMF, Eagle IPC, Graco, Samco Metal Products,  Thoro-matic, Floor Cleaning Machines, Floor buffer